ASTM F963-17 Toy Safety Compression Test Probe Model F963-04 is a custom-designed probe by Ergonomics, created to meet the Compression Test requirements outlined in Clause 8.10 of the ASTM F963-17 Standard for Toy Safety. This standard helps prevent injuries and fatalities in children by ensuring toys meet strict mechanical and chemical safety guidelines. The probe
Ergonomics design, fabricates, and calibrates an array of impactors that comply with the Hammer Tests required in IEC 60068-2-75:2014. Below is our Model IH1, which complies with Figure A.1 of IEC 60068- 2-75:2014. This impactor is designed and fabricated in our tool and design shop located in the same facilities as our ISO 17025:2107 calibration
This high quality precision pin probe is supplied in accordance with all IEC standards listed below. The Test Pin Probe, Model TPP15, is used to test for accessibility of small objects and meets IEC, CSA and UL requirements. Ergonomics designs and manufactures these probes in our own facilities, ensuring top quality parts at a competitive
The UIH20 Universal Impact Hammer is the most versatile Impact Hammer available on the market today. It is designed to perform a wide range of impact tests for product durability. Ergonomics ensures this hammer is designed and built to work safely and easily in laboratory and product testing environments. We can also include an ISO
Incline Plane — Model IP01 The Incline Plane, Model IP01, has been developed in accordance with established product safety standards. Standards such as IEC 60950 and others require product testing at an incline of either 10 or 15 degrees. Test surface is 900 X 870 mm and close to floor for easy access
The Gasket Test Apparatus is used to check the integrity and endurance of gasket materials used in a Type 2, 3, 3Rm 3S 4, 4X 5, 6, 6P 12, 12K or 13 enclosures. The requirements are listed in clause 8.13.3.3 and is referenced as the Compression Test Gaskets used on enclosures for electrical equipment. The
Leverage our experience with designing and fabricating a complete impact test system. Do not waste time trying to figure out all the components required to perform the testing, and eliminate any uncertainty that the test complies with the standard testing requirements. Ergonomics offers a turnkey solution that can be used for testing immediately upon delivery.
Used in IEC 60950 series standards. Recommended to be used with the swivel adaptor G1018-1
Used with force gauges and test fixtures to achieve proper alignment. It relieves stresses to the gauge. Can be used with MGP30 and MGP800 and all gauges having the same threads.
Delrin® disc for testing to IEC 60950.
IEC testing of rigidity of enclosures. IEC 61010 Used with force gauges and other applications.
The WT3-201 wire crimp pull tester is designed to measure the pull-off force of crimped wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1,000 N) of crimp pull force. Adjustable wire terminal grip contains multiple slots for wire diameters up to AWG 3 (0.25 in [6.3 mm]).
The cord set or plug with mains cord are subjected to a flexing test to control how much the bending movement of the cord influences the electrical and mechanical connection.
The Torque/Withdrawal Tester, Model TWT10, has been developed in accordance with product safety standards IEC60950, IEC60335-1, UL and other safety test standards. It is used to determine the effectiveness of strain reliefs. Specifications: Force Gauge: Model M2-50 Range: 0 to 250N Resolution: 0.2N Accuracy: ±0.5% Torque Gauge: Model TTO3-12 Range: 0 to 1.35 Nm Resolution:
This torque test is for components with a one-part AS plug design. It measures the actual torque from the plug connection with a balance.
SIH10 Series (0.2 to 1.0 Joule range): The SIH10 series Impact Hammer is designed to perform impact tests for product durability. This Impact Hammer simulates mechanical impact to electronic products and electrical appliances for one (1) specific energy level, ranging in values from 0.20 Joules to 1.0 Joules. A release mechanism assures a release force
Choose one level between 0.2 to 1 Nm (joules) Made in America
Used to test edges on toys and other products. Required for toy safety testing.
This box contains fifty (50) Tape Caps. The tape caps are constructed to meet the latest revised UL standards. They consist of three (3) pre-assembled tapes on a plastic cap. The cap slips onto the SE400K mandrel for testing. The tape caps are constructed using three (3) layers: one layer of black foam tape, one
The Sharp Edge Tester Kit is used for determining the sharpness of edges of electrical equipment and other consumer products. This kit meets Underwriters Laboratories (UL) standard 1439 and Society of Manufacturing Engineers requirements. It is made of a durable metal (not plastic) housing which fits ergonomically into the palm of the hand. Industry-leading features
The Gauge Set measures creepage and clearance distances, distances through insulation and other spacings.
Measures distances through insulation and other safety-related distances as required by all safety standards.
Used for measuring distances between printed wiring traces, and distances through insulation.
The ESM301 and extended length ESM301L are highly configurable motorized test stands for tension and compression testing applications up to 300 lbF (1.5 kN) for laboratory and production environments.
The ES20 manual test stand is a compact and economical solution for compression and tensile testing of small samples. The use of a hand wheel provides for more precise testing with greater consistency in testing results.
Series TT03 digital torque gauges are designed for clockwise and counter-clockwise torque testing applications in virtually every industry, with capacities from 10 ozFin to 100 lbFin (7 to 1,150 Ncm).
Series 7 professional digital force gauges are designed with a number of sophisticated features for the most demanding tension and compression measurement applications, up to 500 lbF (2500 N).
Series 5 advanced digital force gauges are designed for tension and compression force testing in numerous applications across virtually every industry, with capacities from 0.12 lb to 500 lb (0.5 N to 2500 N).
Series 4 digital force gauges are designed for tension and compression force testing in numerous applications across virtually every industry, with capacities from 0.12 lb to 500 lb (0.5 N to 2500 N).
Series 3 digital force gauges are designed for tension and compression force testing in numerous applications from 0.12 lbF to 500 lbF (0.5 N to 2500 N).
The Screw-Base Lamp Gauge is designed to evaluate live parts of intermediate screw-base lamps. It is made of stainless steel. This gauge meets UL 588 standard.